Air Pressure Regulator Model T10
The Type 10 Regulator controls output pressure with an accuracy of 0.1%, and has very low
sensitivity to changes in supply pressure and flow.
The Type 10 Regulator has been designed to eliminate the need for any readjustment of the regulated
pressure after long "down time." At start-up, the regulated pressure will return to its output setting.
The regulated pressure is held constant over substantial changes in flow due to the high-gain
pneumatic servo amplifier. Particularly good from dead end to 20 cubic meters per hour (12 SCFM).
AUTOMATIC HIGH DOWNSTREAM
An integral relief valve provides for exhaust flow whenever the regulated pressure is reset to a lower value. The exceptionally large capacity of this relief valve assures immediate response when the downstream regulated pressure must be reduced under dead-end conditions.
A high performance servo-operated control mechanism is utilized in the regulator. The pressure supplied to the pneumatic servo amplifier is reduced and held constant.
The standard Type 10 regulator has a locking nut which, when tightened, prevents inadvertent adjustment of pressure.